Friday, October 28, 2011

How To See Out From Under An Invisibility Cloak And Building Granular Towers Drop By Drop

Building granular towers drop by drop  

An unprecedented variety of smooth symmetric, corrugated, zig-zag shaped slender structures can be observed by simply dripping a mixture of sand and water on a liquid absorbing surface such as a dry bed of sand or blotting paper. The various shapes are in contrast with the liquid drops which can splash, spread or bounce upon hitting a surface.

Dripping a mixture of sand and water onto an absorbent surface can lead to striking structures of a wide variety of striking forms.
Credit: Image courtesy of Julien Chopin and Arshad Kudrolli

Successive drops freeze rapidly upon impact due to the drainage of a small fraction of liquid, literally stacking on top of each other into surprisingly slender structures know as granular towers. In addition, twisted pagoda dome-like structures result upon increasing the flow rate of the damp granular mixture. 

Experiments show that the towers are held together because of capillary and friction forces, and the shape of the towers depends on a subtle balance between dripping frequency, density of grains, and impact speed. Besides applications in surface patterning, this tower building technique may be a new and easy way to probe the flow properties of dense granular suspensions by observing the shapes of the towers they produce.


Peering Out from Under an Invisibility Cloak

Most invisibility cloak designs have one serious drawback - they make it impossible for anyone hiding under the cloak to see what's going on in the outside world. Researchers have now come up with an approach that, in theory, should allow us to make cloaks that allow you to peek out while remaining entirely hidden. 

In effect, they propose making a tiny tear in the cloak, and then stitching the hole with a two types of materials chosen to effectively cancel each other out when seen from the outside, while still allowing light to enter. Although the cloak design currently exists only on paper, it theoretically ensures that aspiring Harry Potters remain entirely undetectable while keeping an eye on the Voldemorts and Snapes all around them.

Citation: Jin-Zhu Zhao, De-Lin Wang, Ru-Wen Peng, Qing Hu, and Mu Wang National Laboratory of Solid State Microstructures and Department of Physics, Nanjing University, Physical Review E 84, 046607 (2011)


Contacts and source:

No comments:

Post a Comment